|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Microphone Adapter Cables — Buy at SoundsGood
Microphone adapter cables have different connectors on each end to bridge incompatible equipment. XLR→TRS, XLR→3.5 mm, mini-XLR→XLR, Y-cables, bodypack cables. SoundsGood offers adapter cables from leading brands.
Different Connectors
XLR, TRS, 3.5, mini-XLR
XLR, TRS, 3.5, mini-XLR
Free Shipping
Orders over ₴4,000
Orders over ₴4,000
Installment Plans
PrivatBank / monobank
PrivatBank / monobank
Expert Advice
Matched to your gear
Matched to your gear
🔌 What Is an Adapter Cable
📐 Design
Different connectors on each end. Balanced or unbalanced. 0.3–3 m. One cable instead of adapter + cable.
🎯 Why
Mic XLR → input TRS/3.5 mm. Lav mini-XLR → mixer XLR. One mic → two inputs (Y). More compact, more reliable.
⚠️ Note
Balanced (XLR→TRS) — keeps noise rejection. Unbalanced (XLR→TS/RCA) — loses it. For mics — balanced always.
🔷 XLR→TRS 6.3 mm
Most popular.
📐 XLR M→TRS M
Mic → TRS combo input on interface/mixer. Balanced. 0.5–3 m.
📐 XLR F→TRS M
Mixer XLR out → TRS input. For patchbay, monitoring.
🎯 When
Combo input occupied. Mixer without XLR. TRS patchbay. Studio, installations.
🔷 XLR→3.5 mm
📐 XLR M→3.5 TRS
Mic → camera/recorder. Level is weak — camera may not amplify enough. Condensers need phantom.
📐 XLR M→3.5 TRRS
Mic → smartphone. CTIA wiring. Dynamic only. Condensers need phantom.
⚠️ Limits
XLR level too low for 3.5 input. Solution: preamp or active adapter. Or recorder with XLR.
📡 Bodypack Cables
📐 Connectors
Shure TA4F, Sennheiser 3.5 lock, AKG mini-XLR, Audio-Technica cH, Sony 3.5, Lectrosonics TA5F. NOT interchangeable. Specify model.
📐 Design
Thin 1–2 mm, 1–1.5 m. Brand-specific → lav or universal 3.5/mini-XLR.
🎯 When
Lav from one brand → bodypack from another. Cable replacement. Check pin-out.
🔀 Y-Cables
📐 XLR Y-Cable
1× XLR F → 2× XLR M. One mic → two inputs. Passive. Studio (mixer + recorder).
📐 XLR→2× TRS
Mono → two channels of stereo input. Less common.
⚠️ Y vs Splitter
Y — passive, no isolation. Transformer splitter — isolated. Stage — splitter. Studio — Y is fine.
🔧 Other Types
🔷 Mini-XLR→XLR
For headsets, lavs with mini-XLR. Check pin count (3/4).
🔷 XLR→RCA
For consumer gear. Unbalanced. Specific situations.
🔷 XLR→USB
Built-in ADC. Mini-interface in a cable. Podcasts, Zoom. Some with phantom.
⚡ Balanced vs Unbalanced
🔷 Balanced
XLR→TRS. Two conductors + shield. Protection to 100+ m. For mics — always.
🔷 Unbalanced
XLR→TS, XLR→RCA. One conductor. Noise at 3+ m. Avoid for mics.
🎯 Rule
Mic → always balanced. Unbalanced only without alternative. DI box for conversion.
📊 Comparison
| Type | Connectors | Balanced | Length | Best For |
|---|---|---|---|---|
| XLR M→TRS 6.3 | XLR M → TRS M | Yes | 0.5–3 m | Combo inputs |
| XLR M→3.5 TRS | XLR M → 3.5 TRS | Partial | 0.3–2 m | Cameras |
| XLR M→3.5 TRRS | XLR M → 3.5 TRRS | No | 0.3–2 m | Smartphones |
| Mini-XLR→XLR | Mini → std XLR | Yes | 0.3–2 m | Headsets |
| Bodypack | Brand-specific | Varies | 1–1.5 m | Wireless |
| Y-cable | 1×F → 2×M | Yes | 0.3–1 m | Splitting |
| XLR→RCA | XLR → RCA | No | 1–3 m | Consumer |
| XLR→USB | XLR → USB | Digital | 1–3 m | No interface |
🎯 How to Choose
🎙️ Mic→Interface TRS
XLR M→TRS 6.3. Balanced. 0.5–2 m. If XLR input available — standard XLR is better.
🎬 Mic→Camera
XLR M→3.5 TRS (dynamic). Condenser — active adapter with phantom. Or recorder.
📱 Mic→Smartphone
XLR→3.5 TRRS (dynamic only). Condenser — XLR interface Lightning/USB-C. Or wireless.
📡 Lav→Other Bodypack
Brand-specific adapter cable. Model required. Check pin-out. Original is best.
🔀 1 Mic→2 Inputs
Y-cable (studio) or transformer splitter (stage).
🔧 Mini-XLR→XLR
For headsets/lavs. Check pin count (3/4) and wiring.
💻 XLR→Computer
XLR→USB with built-in ADC. Budget. Some with phantom. Quality below a separate interface.
🏠 Basic Set
1× XLR M→TRS (0.5 m) + 1× XLR M→3.5 TRS (1 m). Covers 90%. Stage — add Y-cable + gender changer.
❓ FAQ
What is it?
Cable with different connectors. XLR→TRS, XLR→3.5, mini-XLR→XLR. More reliable than adapter+cable.
XLR→TRS balanced?
Yes. TRS (3 contacts) = balanced. TS (2) = unbalanced. For mics — TRS.
For bodypack?
Brand-specific: Shure TA4F, Sennheiser lock, AKG mini-XLR. NOT interchangeable.
XLR→3.5 for camera?
Dynamic — yes. Condenser — active with phantom. Recorder is better.
Y or splitter?
Y — simple, no isolation. Splitter — isolated. Stage — splitter.
Length?
0.3–3 m. Shorter is better. Long runs — XLR + adapter at end.
🏆 Why SoundsGood
Full Selection
XLR→TRS, 3.5, bodypack, Y
Free Shipping
Orders over ₴4,000
Installment Plans
PrivatBank & monobank
Expert Advice
Matched to your gear
Leading Brands
Wide assortment
Showroom in Kyiv
15 Olzhycha St.
Fast Dispatch
Same day before 3 PM
📞 Contacts
✉️ Email
📍 Address
15 Olzhycha St., Kyiv, 04116
Metro: Dorohozhychi
🕐 Hours
Mon–Fri: 11:00 AM – 6:00 PM
Sat–Sun: Closed