A guitar cabinet converts the amplifier signal into sound and strongly affects volume, attack, low-frequency response and projection. This category covers electric guitar and bass cabinets, from compact single-speaker enclosures to large stage systems.
Manufacturer or importer
Up to 7 PrivatBank or 6 monobank payments
Nova Poshta and pickup
For your amplifier, instrument and stage
Electric guitar and bass cabinets use different designs, working ranges and speaker requirements.
Speaker count and diameter affect radiating area, response, size and tonal character.
Total cabinet impedance must be permitted by the amplifier, while power handling must suit the operating conditions.
Closed-back designs provide tighter lows and stronger directionality, while open-back cabinets spread sound more broadly.
| Format | Advantages | Check | Typical use |
|---|---|---|---|
| 1×12 | Compact size and a distinct single-speaker voice | Sensitivity, power, open or closed back | Home, studio, small stage |
| 2×12 | Balance of scale and portability | Orientation, impedance, mono or stereo | Rehearsal, recording, stage |
| 4×10 | Fast attack and large radiating area | Low-frequency range, impedance and weight | Bass, vintage guitar rigs |
| 4×12 | Powerful projection and dense lows | Straight or slanted enclosure, wiring mode | Large stages, rock and heavy styles |
| 8×10 | Maximum output reserve and punch | Transport, size, impedance and power | Professional bass stage rigs |
Start with the instrument, amplifier, required volume and use case. Then compare impedance, power handling, sensitivity, speaker configuration and enclosure design.
Home, studio, rehearsal, club and large-stage work need different size and output reserves.
Check minimum permitted impedance, output power and the recommended connection method.
Compare speakers, enclosure, ports, connectors, handles, casters and protection.
1×12, 2×12, 4×10, 4×12 and 8×10 identify speaker quantity and diameter in inches.
A 4, 8 or 16 ohm total load must remain within the amplifier’s permitted range.
Use the cabinet’s continuous power rating and consider amplifier headroom.
Higher sensitivity produces more volume from the same applied power.
Open, closed or vented construction affects lows, directionality and attack.
Check connector type, parallel linking, mono/stereo switching and internal wiring.
Compact size and controlled volume are easier to manage in a room.
A familiar speaker voice, low unwanted noise and practical microphone placement matter.
The cabinet must stay clear beside drums and avoid overload.
Adequate projection, reliable connectors, protective hardware and easy transport are important.
Below is a broad reference list of global manufacturers associated with guitar and bass cabinets, amplification and specialized speakers. It does not state that every brand is currently stocked by SoundsGood.
Confirm availability or ordering options for a specific brand and model separately. This reference supports comparison and does not limit future catalog growth.
Never connect a load below the amplifier manufacturer’s permitted minimum.
An amplifier-to-cabinet connection requires a speaker cable, not an instrument cable.
Harsh distortion, coil impact or an overheating smell means volume must be reduced immediately.
A grille, cover and careful transport protect cones and the enclosure.
Bass-reflex ports and ventilation openings must remain unobstructed.
Use a level surface and lock casters before operation.
We help match the cabinet, amplifier head, impedance, power and cables to the instrument and working conditions.
SoundsGood works with public and commercial customers and participates in procurement through Prozorro. We help create a compatible system for technical requirements.
We match configuration, power, impedance, amplifiers, cables and component compatibility.
We prepare an invoice, quotation and available supporting documents.
We can package cabinets, amplifiers, cables, covers, stands and spare parts.
We work with specifications, deadlines, delivery and procurement requirements.
Send an equipment list or technical specification for a quotation. More about tenders
No. Check permitted impedance, power handling, cabinet type and the amplifier manufacturer’s instructions.
Both matter. Speakers shape sensitivity and voice, while enclosure volume and construction influence lows, resonance and dispersion.
Compare total cabinet impedance with the amplifier outputs and minimum permitted load. Use only manufacturer-approved configurations.
A sensible margin reduces overload risk, but amplifier type, actual operation and manufacturer guidance all matter.
No. This connection requires a speaker cable of suitable gauge and length.
An open cabinet radiates in both directions and often feels airier; a closed cabinet provides tighter lows and greater directionality.
Yes, when the amplifier supports the resulting total impedance and provides the correct output arrangement.
Yes. SoundsGood supports cashless payment, commercial orders and Prozorro procurement.
Tell us the amplifier model, instrument, style and required volume, and we will match a compatible cabinet and cable.
