|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Record vocals and an instrument
The Focusrite Scarlett Solo 4th Gen is a compact fourth-generation USB audio interface for recording a microphone alongside a guitar, bass or line-level source. The microphone connects to the rear XLR input, while the instrument or line source uses the front 6.35 mm jack. Recording is supported at up to 24-bit/192 kHz.
Control while recording
The microphone preamp offers a 57 dB gain range and 48 V phantom power for compatible microphones. Air Presence and Harmonic Drive modes change the signal character. Gain Halo metering helps set levels, while Direct Monitor lets you hear the input without the computer’s processing delay.
Two balanced 6.35 mm TRS outputs connect to active monitors or an amplifier. Headphones use a separate 6.35 mm stereo output with their own volume control. Software Loopback enables recording of the computer’s playback audio.
Connection and package
- USB 2.0 over a USB-C connector for computer data and bus power.
- 2 physical inputs and 2 line outputs; Loopback does not add physical sockets.
- A 1 m USB-C to USB-A cable is included.
- Dimensions: 143 × 46.5 × 96 mm, width × height × depth; weight 382 g.
A compatible computer and recording software are required. This standalone interface package does not include a microphone, instrument or headphones.
Air affects the microphone input; Harmonic Drive is available at sample rates up to 96 kHz.