|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
A separate D-Vice mounting part
The Audix DVice fastener is the individual clamp used in a D-Vice microphone mounting system. It is intended for a setup where the rim attachment needs replacing while the other holder components remain serviceable. Choosing the separate part allows the existing assembly to be repaired without replacing the complete holder solely because of its clamp.
Spring clamp and locking screw
The body combines a spring-operated rim clamp with a side screw that secures the holder shaft. These parts form the mechanical attachment point, while the other components position and grip the microphone. Compare its shape with the clamp already fitted to your D-Vice before selecting it as a replacement part.
Fitting it to an existing holder
Select the fastener for the appropriate D-Vice assembly and check the condition of the remaining parts. During replacement, check shaft seating, spring movement and the locking screw. Once assembled, confirm the attachment sits properly on the drum rim and the microphone position leaves room for playing. Route the cable without pulling the holder sideways.
Contents and system components
This item supplies one DVice fastener clamp with its side locking screw. The gooseneck, microphone clip, microphone and cable are separate components. Use suitable existing parts or select them separately to complete the working microphone setup. Matching the actual attachment is essential when replacing a part within a D-Vice system.