|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Microphone cable for custom wiring
Soundking GA202 (Red) has two insulated signal conductors surrounded by a separate shield. It can be used to build balanced audio connections with the appropriate termination and wiring scheme. The red outer jacket helps distinguish individual cables in studio or stage systems. Colour identification helps trace adjacent lines during setup.
Stranded conductors and insulation
Each signal conductor has a nominal cross section of 0.23 mm² and contains twenty copper strands, each 0.12 mm in diameter. High density polyethylene, or HDPE, provides the conductor insulation. Red and white insulation identifies the two conductors for consistent termination at both ends. The conductors are twisted together, while the shield forms a separate part of the cable construction.
Spiral shielding and flexible jacket
The oxygen-free copper spiral shield contains 64 strands of 0.12 mm wire and provides a stated 90% coverage around the signal pair. It helps reduce external interference when the line is correctly assembled. A flexible PVC jacket protects the inner components and makes the cable easier to route. The 6 mm outer diameter should be considered when selecting a connector and its cable clamp.
Sold by the metre
The selling unit is one metre. The 100 m factory roll describes bulk packaging rather than the quantity supplied for one unit ordered. The cable has no fitted connectors, so suitable connectors are selected separately. Plan the required length and termination before assembly, then check conductor continuity and shield connections before putting the completed line into service.