|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Microphone cable for custom assembly
Soundking GA203 Black is bulk wire for making microphone cables to the required length. The black jacket provides a discreet finish beside a microphone stand, mixer or recording desk. Buying by the metre lets you plan the cable around your equipment layout. Select suitable connectors and a wiring arrangement separately to create the finished connection.
Two conductors and layered shielding
Each of the two stranded copper conductors has a nominal cross-sectional area of 0.23 mm² and consists of twenty 0.12 mm strands. The conductors are insulated with low-density polyethylene, or LDPE. A braided copper shield with 85% coverage works alongside an additional conductive PVC layer. Keep these shielding elements separate from the insulated signal conductors during termination.
A flexible 6.8 mm outer jacket
The black outer jacket is made from flexible PVC. The overall cable diameter is 6.8 mm, so choose connectors with suitable cable entries and strain relief. A balanced microphone connection depends on correctly terminating both signal conductors and the shield. Secure the outer jacket in each connector to avoid placing cable tension directly on the conductor joints.
One metre is the sales unit
The price applies to one metre of cable. A 100 m factory reel is the original winding format rather than the contents of one retail unit. No connectors are fitted; choose these and other assembly materials separately. Check the completed cable for correct pin connections, unwanted conductor contact and secure jacket support before connecting your equipment.