|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Blue cable for custom audio lines
Soundking GA203 (Blue) is intended for making microphone cables and balanced audio connections with suitable connectors and wiring. It contains two signal conductors and shielding, while the blue outer jacket helps identify individual lines on stage or in the studio. The required length and connectors can be planned around the equipment.
Stranded conductors with LDPE insulation
Each conductor has a nominal cross section of 0.23 mm² and consists of twenty copper strands, each 0.12 mm in diameter. The conductors are twisted together and insulated with low density polyethylene, or LDPE. Red and white insulation helps keep termination consistent at both ends. The stranded construction works with the flexible outer jacket when routing the cable.
Braided shield and conductive layer
The oxygen-free copper braid uses 96 strands of 0.12 mm wire and has a stated coverage of 85%. A conductive PVC layer provides an additional part of the shielding construction around the signal conductors. These layers help reduce external interference when the cable is correctly terminated. The flexible PVC outer jacket has a diameter of 6.8 mm, which matters when selecting connectors and cable clamps.
Metered sale and termination
The selling unit is one metre. The 100 m factory roll describes bulk packaging rather than the amount supplied for one unit ordered. The cable has no fitted connectors; suitable connectors must be selected separately for the equipment. After cutting and termination, check signal continuity and the shield connections before using the completed audio line.