E String Thomastik Vision Titanium Solo 4/4 for Violin

VIT01 is the string the whole line is named after. Where most synthetic sets use tin-plated carbon steel for the E, this one starts from stainless steel with a surface finished in titanium design (Thomastik's own shop lists the outer material as "Titanium design / Molybdenum"). Tension is 8.0 kp (17.6 lb) over a 32.5 cm vibrating length, and the end is aluminium with a removable ball made of Titanal alloy: unscrew the ball and you have a loop. The maker calls the line strings with "a pure focused tone" and the choice of soloists, and it is on the E that you hear this most directly — a narrower, more collected tone with a clearly defined middle to the attack. The surface, in Thomastik's words, is "highly polished", so the finger travels over it quietly.

🏆 SoundsGood — genuine Thomastik-Infeld strings only, made in Vienna.

Stainless Steel Instead of Tin Plating

The E is the only string in a set that meets finger and bow as bare metal, with no winding in between, so the fate of its surface decides everything. Tin plating dulls from perspiration and salts fairly quickly: first the sheen of the upper partials goes, then a dry edge appears. A stainless base with a titanium finish lasts longer, which is exactly why this E gets bought by players whose E dies before the rest of the set. The practical effect is not brighter — it is stays the way you bought it for longer.

8.0 kp: Why That Particular Figure

Eight kilogram-force on a single thin steel filament is the same tension as the E of the basic Vision line and 0.3 kp above the orchestral VIT01o at 7.7 kp. The difference shows up in the attack: the tighter the steel, the less it wanders as the note begins, so each beginning reads immediately, staccato stays articulate, and heavy pressure in the high positions does not drag the pitch down. Worth knowing the other side in advance: a tighter E asks for a more accurate bow and forgives a limp attack less readily than the orchestral option does. For solo repertoire that is a good trade — a predictable response in the upper third of the fingerboard costs a little more discipline in the right hand.

Removable Titanal Ball — Ball End and Loop End in One

The string end is aluminium and the ball is made of Titanal alloy and unscrews, exposing a loop end underneath. One and the same string therefore fits a fine-tuner hook and a loop-end tailpiece, with no adapters and no cutting. That also makes VIT01 convenient for experimenting: the E is the string players swap most often in any set, and this one goes onto almost any standard tailpiece arrangement.

Specifications

What's Included

One E string in official Thomastik packaging marked with the article number VIT01. The ball end unscrews, so the line has no separate ball and loop versions — this single article covers both.

Who It's For

A string for the soloist who wants a clear, focused E with a predictable attack; for the player whose hands sweat and whose tin-plated E dulls within a fortnight; and for anyone assembling a personal combination of voices who needs an E that fits both a fine-tuner hook and a loop-end holder.

Frequently Asked Questions

🚚 Shipping and Payment

🏆 SoundsGood — full warranty and service support
✅ Quality guarantee — genuine strings only
🏪 Pickup — Kyiv, free
🚚 Nova Poshta / Ukrposhta / Meest — 1–3 days
💳 Installments — PrivatBank, Monobank

🎻 Order the Vision Titanium Solo E string at SoundsGood! ⚡