|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Make your microphone connection wireless
Xvive U3 sends a microphone signal to a mixer or other equipment with a suitable XLR input. The set contains one U3T transmitter and one U3R receiver for performances, rehearsals and presentations. Connect the transmitter to your microphone and the receiver to the audio input to establish the wireless signal path.
Microphone compatibility and XLR connections
U3 supports dynamic microphones and condenser microphones with their own battery power. The transmitter has a female XLR input and the receiver a male XLR output. Mic/Line selects the input mode, while mute silences the signal. U3 does not provide phantom power, so check your microphone’s power requirements before choosing it.
A single digital audio channel
The system carries one mono signal over a 2.4 GHz digital link with 24-bit/48 kHz audio. Select the same channel on both units from six available settings. In Line mode, a pair can also connect a suitable mixer output to a powered speaker. Separate left and right signals require two complete pairs.
Charging and package contents
Internal rechargeable batteries provide up to approximately five hours of operation. Both units charge through Micro-USB from a 5 V USB source. The package includes one U3T, one U3R, a USB cable with two charging connectors, a soft pouch and a guide. Select a compatible microphone separately for your application.