|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Power for two microphones
The Superlux PS2A supplies 48 V phantom power to two compatible condenser microphones. Install it between the microphones and receiving equipment when a separate power source is needed. It can serve two individual microphones or a stereo pair, routing each signal to a suitable microphone input on a mixer, recorder or interface.
Separate XLR connections
The front panel has two three-pin female XLR inputs labelled MIC 1 and MIC 2. Each has a corresponding three-pin male XLR output, labelled OUTPUT 1 or OUTPUT 2. These labels help keep the two connections organized. Use appropriate microphone cables and maintain a separate signal path for each microphone.
AC power and controls
The PS2A operates from AC mains. A mains cable inlet and power switch are located on the rear panel, with an indicator at the front. Check the electrical rating of the actual unit before use and connect cables with power switched off. Mute the receiving channels when changing connections to avoid loud switching transients.
Part of a recording system
The unit provides phantom power within an existing microphone signal chain. Set gain and recording level on the mixer, recorder or interface. Check that each microphone requires 48 V before connecting it. The PS2A is a separate device; select microphones and signal cables to suit the equipment layout and recording task.