|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
For miniature condenser microphones
The Superlux PS418D is a powering adapter and preamplifier for compatible miniature electret condenser microphones. It connects the compact microphone to a wired setup using a full-size XLR connection. It suits stage and recording systems where the chosen microphone has the required connector and electrically compatible capsule wiring.
Two power options
The PS418D operates from 9–52 V phantom power or a 1.5 V AA/UM3 battery. Battery operation is useful when the receiving equipment does not provide phantom power. Choose the operating arrangement for the microphone and recording system. Check the power switch and battery compartment polarity before installing a battery and connecting cables.
TA3M and XLR connections
A three-pin TA3M input accepts the TA3F connector of a compatible microphone. The output is a full-size three-pin male XLR. Connector shape alone does not establish compatibility: the capsule requirements and wiring must also match. Set the signal level on the connected mixer, interface or other equipment with a suitable microphone input.
Switchable low-cut filter
The low-cut filter operates at 80 Hz with a 12 dB per octave slope. Use it to reduce unwanted low-frequency content while checking its effect on the intended sound. The switch offers flat response, low-cut and power-off positions. The PS418D is a separate module; select the microphone and connecting cables for the application.